Moduli impermeabili fotovoltaici


The range has been designed to make the most of the available space on the roof and make the design stage easier.

  1. 408 Wp per module - 3 long strings
    dimensions: 5486 x 1200 x 7 mm
    area: 6,58 mq
  2. 272 Wp per module - 2 long strings
    dimensions: 5486 x 800 x 7 mm
    area: 4,39 mq
  3. 204 Wp per module - 3 short strings
    dimensions: 2849 x 1200 x 7 mm
    area: 3,42 mq
  4. 136 Wp per module - 2 short strings
    dimensions: 2849 x 800 x 7 mm
    area: 2,28 mq

For long models, also more powerful versions General SOLAR PV 432 and General SOLAR PV 288 are available upon request.

The unit of measurement is kilowatt-peak (kWp), used as a standard unit in the world of photovoltaic panels.
General SOLAR PV needs approximately 17 sq m of surface to install 1 kWp on a roof.
However, these are 17 effective sq m, i.e. they don't take up more space than declared.
A traditional system with a rigid glass panel and framework needs less photovoltaic square meters to obtain 1 kWp, but each row of panels, positioned on supports, needs to be placed at an adequate distance from the preceding and following row to prevent the panels from shading themselves and become less effective.
Ultimately the two types of modules occupy more or less the same amount of space on the roof, but General SOLAR PV has a considerably lower impact when compared to traditional systems.

All of the General SOLAR PV versions are certified in accordance with the IEC EN 61646 and IEC EN 61730 standards, which are mandatory for the "Conto Energia" feed-in scheme. General SOLAR PV received both the TUV InterCert and the Eurotest Certification. All the documents are available in the Documents page.


Certifications in accordance with the
IEC EN 61646 and IEC EN 61730 standards.

Gamma moduli impermeabili fotovoltaici General Solar PV

Range of Waterproof solar modules
General SOLAR PV